What’s in the Box?
1x Plant Lighting Smart Controller module
1x Power cable (DC 5V)
2x Temperature and humidity sensors
2x RJ14 network data cables
2x RJ14 daisy chain connectors
2x Screw anchors
2x Mounting screws and anchors
1x User manual
Control Multiple Fixture Groups
Control up to 160 total fixtures across 2 groups (80 fixtures per group) in separate grow areas with the simple to use 8.5″ LED touch screen. Easily view each group’s power levels, temperature, humidity, dimming status and emergency shut down status from the Home Screen. Operates compatible LED and HID fixtures.
Select Dimming & Fixture Types
Set each group’s dimming level and fixture type (LED 15-100% or HID 50-115%) from the Dimming screen. Choose either manual On/Off or Auto-Pilot dimming modes.
Auto Pilot Dimming Modes
Adjust dimming manually or program light levels and time schedules using one of three cycle options: Daily Cycle (24-hr period), Custom Cycle (48-hr period) and Hourly Daily Cycle (hour by hour over a 24-hr period).
Sunrise & Sunset Mode
Enter a minute value between 10-60 minutes to set the amount of time it takes the lights to dim on and dim off at the beginning and end of each cycle for each group to mimic natural sunrise and sunset conditions.
Overheat Protection
Assign temperature thresholds for Auto-Dim and Shut-Down protocols to protect plants from excessive heat in case of HVAC failure or other emergencies.
Quick & Simple Installation
Each controller comes with mounting hardware, power cable, two 16′ temperature and humidity sensors, two 10′ RJ14 network data cables, two RJ14 daisy chain connectors and a user manual. To the connect the controller to the fixture, simply plug the RJ14 network data cable into the light fixture’s dimming or communication port.
Download PDF
